Drain Hose Clamp secures the outer drain hose to the unit to allow proper draining. Published on Oct 30, 2017 Go to the back of the washing machine and locate the drain hose and clamp. With your Channellock, grasp onto the clamp, pull out the hose then clamp. Grab your new OEM replacement Clamp, place it inside. Click to see full answer. Also, how do you secure a washing machine drain hose?Insert free end of drain hose A into drain opening of your home. If water valves and drain are built into wall, fasten drain hose to one of water hoses with cable tie B provided (ribbed side on inside). If your drain is a standpipe, fasten drain hose A to standpipe with cable B provided.Subsequently, question is, where does the washing machine drain hose go? Typically the hose is hung from over the side, and then over the top rim of the sink. It is important to have a sizable air gap between the end of the drain hose, and the bottom of the sink. An air gap prevents backwater from ever getting sicked back into your washing machine. In this regard, how do you tighten a drain hose clamp? Squeeze the clamp with one hand so that the end opposite the driver slides into the sleeve holding the driver. Turn the driver clockwise with the screwdriver or wrench so the threads on the driver engage the slots on the clamp. Continue turning the driver until the clamp tightens around the hose securely.How long can washing machine drain hose be?If a remodeling project forces you to move the washing machine too far from the drain and the water supply for the hoses to reach, you don’t have to relocate the plumbing. You can buy supply hoses in lengths up to 96 inches, which you can attach to your existing hoses with 3/4-inch hose thread connectors.
ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKR6urvUZpqlmZ2leqJ51pqqoaGenHqurcKhoKedXZm%2ForXNZp%2Boq5Vk